1. Storage and Installation Environment

Storage Instructions

Ensure all components are properly packaged during storage.

Store in a well-ventilated, room-temperature environment.

Storage humidity: less than 90%, no freezing.

Keep away from corrosive gases and liquids.

Do not store batteries upside down or tilted.

Important: During extended storage, the batteries must be recharged every six months. Charging Instructions: Place the solar street light in an open, sunny location during the day, with the solar side facing upward. Turn on the power switch to start charging. Turn off the power switch at night to store the power. Repeat this process for 2-3 sunny days.

Operating Environment

Operating Temperature: -15°C to 50°C

Operating Humidity: 0-90%

2. Safety Instructions

Keep this manual in good condition. This manual contains important information that must be followed during installation and maintenance. Please keep this manual in your possession. Installation and maintenance must be performed by qualified technicians. Fireworks are strictly prohibited at the installation site. Batteries generate a small amount of hydrogen gas, which can explode in the presence of open flames.

Transportation/Installation Instructions

During transportation and installation, please carefully protect fragile items such as solar panels and lamps and handle them with care.

During transportation and installation, please carefully protect the painted surfaces of the lamp pole, arm, bracket, and lamp to avoid scratches. The lamp pole, arm, and bracket have sharp edges; please wear gloves to avoid scratching your skin.

It is not recommended to install the lamp on rainy days.